stream-reassemble user-configure defense-check

Function

The stream-reassemble user-configure defense-check command enables the TCP attack defense function.

The undo stream-reassemble user-configure defense-check command disables the TCP attack defense function.

By default, the TCP attack defense function is disabled.

stream-reassemble user-configure defense-check

undo stream-reassemble user-configure defense-check

None

System view

2: Configuration level

Usage Scenario

After this function is enabled, the switch directly discards abnormal TCP packets.

Prerequisites

Before running this command, you must run the defence engine enable command to enable the IAE.

# Enable the TCP attack defense function.

<HUAWEI> system-view
[HUAWEI] defence engine enable
[HUAWEI] stream-reassemble user-configure defense-check