system recording-scheme

Function

The system recording-scheme command applies a policy in a recording scheme to record the system events.

The undo system recording-scheme command deletes a policy from a recording scheme. System events are not recorded then.

By default, system events are not recorded.

Format

system recording-scheme recording-scheme-name

undo system recording-scheme

Parameters

Parameter	Description	Value
recording-scheme-name	Specifies the name of a recording scheme.	The recording scheme must already exist.

Views

AAA view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

The system events recorded on an HWTACACS server helps you monitor devices. When network faults occur, you can isolate faults based on the system events recorded on the HWTACACS server.

Prerequisites

A recording scheme has been created using the recording-scheme command in the AAA view and an HWTACACS server template has been associated with a recording scheme using the recording-mode hwtacacs command in the recording scheme view.

Precautions

Currently, the device can record only the events caused by the reboot command.

Example

# Apply a policy in the recording scheme scheme to record the system events.

<HUAWEI> system-view
[HUAWEI] hwtacacs-server template hw1
[HUAWEI-hwtacacs-hw1] quit
[HUAWEI] aaa
[HUAWEI-aaa] recording-scheme scheme
[HUAWEI-aaa-recording-scheme] recording-mode hwtacacs hw1
[HUAWEI-aaa-recording-scheme] quit
[HUAWEI-aaa] system recording-scheme scheme