The tcp ipv6 timer syn-timeout command sets the value of the TCP6 SYN-Wait timer.
The undo tcp ipv6 timer syn-timeout command restores the default value of the TCP6 SYN-Wait timer.
By default, the value of the TCP6 SYN-Wait timer is 75s.
| Parameter | Description | Value |
|---|---|---|
| interval | Specifies the value of the TCP6 SYN-Wait timer. | The value is an integer that ranges from 2 to 600, in seconds. The default value is 75s. |
Usage Scenario
When an SYN packet is sent, the TCP6 SYN-Wait timer is started. If no response packet is received when the TCP6 SYN-Wait timer expires, the TCP6 connection is closed.
Precautions
If you run the tcp ipv6 timer syn-timeout command multiple times, only the latest configuration takes effect.
You are advised to use this command under the supervision of technical support personnel.