The terminal monitor command enables display of logs, traps, and debugging message output by the information center on the user terminal.
The undo terminal monitor command disables display of logs, traps, and debugging message output by the information center on the user terminal.
By default, console display is enabled and terminal display is disabled.
Prerequisites
The information center has been enabled by using the info-center enable command.
Follow-up Procedure
Run the terminal debugging/undo terminal debugging, terminal logging/undo terminal logging, terminal trapping/undo terminal trapping/ command to enable or disable terminal debugging message, log, or trap display.
Precautions
Logs, traps, and debugging message are sent to the current terminal only when the terminal monitor command is used.
Running the undo terminal monitor command is equivalent to running the undo terminal debugging, undo terminal logging, undo terminal trapping command.