The timestamp-unit command sets the unit of timestamp for an NQA test instance.
The undo timestamp-unit command restores the default setting.
By default, the unit of timestamp for an NQA test instance is millisecond.
timestamp-unit { millisecond | microsecond }
undo timestamp-unit microsecond
NQA view
2: Configuration level
This command applies to the ICMP Jitter and UDP Jitter tests.
# Set the unit of timestamp for an NQA test instance to microsecond.
<HUAWEI> system-view [HUAWEI] nqa test-instance user test [HUAWEI-nqa-user-test] test-type jitter [HUAWEI-nqa-user-test] timestamp-unit microsecond