topology enable

Function

The topology enable command enables the Commander to collect network topology information.

The undo topology enable command disables the Commander from collecting network topology information.

By default, the Commander is disabled from collecting network topology information.

Format

topology enable

undo topology enable

Parameters

None

Views

Easy-Operation view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

You can run the topology enable command to enable the Commander to collect network topology information every 5 minutes. Based on the collected information, you can implement zero touch device deployment and automatic faulty device replacement.

Prerequisites

NDP and NTDP have been enabled.

The interval for collecting topology information through NTDP has been set.

Example

# Enable network topology information collection on the Commander.

<HUAWEI> system-view
[HUAWEI] easy-operation
[HUAWEI-easyoperation] topology enable