topology explore
Function
The topology explore command triggers SVF network topology collection immediately.
The topology explore interval command sets the interval for collecting SVF network topology information.
The undo topology explore interval command restores the default interval for collecting SVF network topology information.
By default, the interval for collecting SVF network topology information is 10 minutes.
This command can only be executed on a parent switch.
Parameters
| Parameter | Description | Value |
|---|---|---|
| interval | Specifies the interval for collecting SVF network topology information. |
The value is an integer that ranges from 0 to 1440, in minutes. The value 0 indicates that SVF network topology information is not automatically collected. |
Usage Guidelines
You can adjust the interval for collecting SVF network topology information based on SVF network stability. When the network topology is stable, you can increase the interval or disable periodic topology information collection. When the network topology is unstable, you can shorten the interval.
You can also run the topology explore command to trigger SVF network topology collection immediately.