tpc request enable

Function

The tpc request enable command enables the transmit power control (TPC) request measurement function.

The undo tpc request enable command disables the TPC request measurement function.

By default, the TPC request measurement function is disabled.

This configuration takes effect only on APs of V200R019C10 or later versions.

Format

tpc request enable

undo tpc request enable

Parameters

None

Views

RRM profile view

Default Level

2: Configuration level

Usage Guidelines

In high-density scenarios, APs are densely deployed. After the TPC request measurement function is enabled, an AP can adjust the uplink transmit power of 802.11ax STAs based on the received signal strength indicators (RSSIs) in uplink packets received from the STAs using the TPC algorithm, reducing interference to neighboring devices while ensuring service communication quality.

Example

# Enable the TPC request measurement function.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] rrm-profile name default
[HUAWEI-wlan-rrm-prof-default] tpc request enable