tracert-hopfailtimes

Function

The tracert-hopfailtimes command sets the number of consecutive failed hops indicating a failed trace test instance.

The undo tracert-hopfailtimes command restores the default number of consecutive failed hops indicating a failed trace test instance.

By default, five consecutive failed hops indicate a failed trace test instance.

tracert-hopfailtimes times

undo tracert-hopfailtimes

Parameter	Description	Value
times	Specifies the number of consecutive failed hops indicating a failed trace test instance.	The value is an integer that ranges from 1 to 255.

NQA view

2: Configuration level

The tracert-hopfailtimes command only takes effect for trace test instances.

You cannot change this configuration of a running test instance.

# Set the number of consecutive failed hops indicating a failed trace test instance to 6.

<HUAWEI> system-view
[HUAWEI] nqa test-instance user test
[HUAWEI-nqa-user-test] test-type trace
[HUAWEI-nqa-user-test] tracert-hopfailtimes 6