track vrrp6

Function

The track vrrp6 command binds an IPv6 VRRP group to an HSB group.

The undo track vrrp6 command unbinds the IPv6 VRRP group from the HSB group.

By default, no IPv6 VRRP group is bound to an HSB group.

Format

track vrrp6 vrid virtual-router-id interface interface-type interface-number

undo track vrrp6 [ vrid virtual-router-id interface interface-type interface-number ]

Parameters

Parameter	Description	Value
vrid virtual-router-id	Specifies the ID of an IPv6 VRRP group bound to an HSB group.	The value is an integer that ranges from 1 to 255.
interface interface-type interface-number	Specifies the type and number of the interface in an IPv6 VRRP group. interface-type specifies the interface type. interface-number specifies the interface number.	-

Parameter

Description

Value

vrid virtual-router-id

Specifies the ID of an IPv6 VRRP group bound to an HSB group.

The value is an integer that ranges from 1 to 255.

interface interface-type interface-number

Specifies the type and number of the interface in an IPv6 VRRP group.

interface-type specifies the interface type.
interface-number specifies the interface number.

Views

HSB group view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

When the HSB service is used, you need to run this command to bind a VRRP group to an HSB group. The HSB group negotiates the service status based on the VRRP status. By monitoring the changes in the bound HSB channel status and VRRP status, the HSB group instructs service modules to perform batch backup, real-time backup, and status synchronization.

Prerequisites

An HSB group has been configured.

Example

# Bind IPv6 VRRP group 4 on VLANIF100 to HSB group 0.

<HUAWEI> system-view
[HUAWEI] hsb-group 0
[HUAWEI-hsb-group-0] track vrrp6 vrid 4 interface vlanif 100