traffic-optimize bcmc unicast-send mismatch-action drop

Function

The traffic-optimize bcmc unicast-send mismatch-action drop command discards broadcast or multicast packets that fail to be converted into unicast packets on air interfaces.

The undo traffic-optimize bcmc unicast-send mismatch-action drop command restores the default action, that is, send broadcast or multicast packets that fail to be converted into unicast packets on air interfaces to all users in unicast mode.

By default, if broadcast or multicast packets fail to be converted into unicast packets on air interfaces, the packets are discarded.

Format

traffic-optimize bcmc unicast-send mismatch-action drop

undo traffic-optimize bcmc unicast-send mismatch-action drop

Parameters

None

Views

Traffic profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

By default, if broadcast or multicast packets fail to be converted into unicast packets on air interfaces, the packets are discarded. To enable the system to send these packets to all users, run the undo traffic-optimize bcmc unicast-send mismatch-action drop command.

Prerequisites

The traffic-optimize bcmc unicast-send command has been executed to configure the function of converting broadcast or multicast packets to unicast packets on an air interface.
The undo learn-client-address { ipv4 | ipv6 } disable command has been executed to enable STA address learning.

Example

# Configure the system to send the broadcast or multicast packets that fail to be converted into unicast packets on air interfaces to all users.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] traffic-profile name p1
[HUAWEI-wlan-traffic-prof-p1] undo traffic-optimize bcmc unicast-send mismatch-action drop