The traffic-optimize broadcast-suppression enable command enables rate limit for broadcast and multicast packets packets on an AP.
The undo traffic-optimize broadcast-suppression enable command disables rate limit for broadcast and multicast packets packets on an AP.
By default, rate limit for broadcast and multicast packets packets is disabled on an AP.
traffic-optimize broadcast-suppression { all | arp | igmp | nd | other } enable
undo traffic-optimize broadcast-suppression { all | arp | igmp | nd | other } enable
Parameter |
Description |
Value |
|---|---|---|
| all | Enables rate limit for all broadcast and multicast packets packets. |
- |
| arp | Enables rate limit for ARP broadcast packets. |
- |
| igmp | Enables rate limit for IGMP multicast packets. |
- |
| nd | Enables rate limit for ND broadcast packets. |
- |
| other | Enables rate limit for broadcast packets other than ARP and ND broadcast packets. |
- |