traffic-optimize sta-bridge-forward disable

Function

The traffic-optimize sta-bridge-forward disable command forbids an air interface to forward packets to bridging terminals.

The undo traffic-optimize sta-bridge-forward disable command cancels of the configuration of forbidding an air interface to forward packets to bridging terminals.

By default, an air interface is allowed to forward packets to bridging terminals.

Format

traffic-optimize sta-bridge-forward disable

undo traffic-optimize sta-bridge-forward disable

Parameters

None

Views

Traffic profile view

Default Level

2: Configuration level

Usage Guidelines

Some terminals on the wireless network can provide bridging functions. The terminals associate with APs with their MAC addresses and connect to multiple Layer 3 wired devices in the downlink direction. The connected Layer 3 wired devices can also obtain IP addresses and forward traffic through the APs. The APs consider that the associated terminals have multiple IP addresses. You can run the command to forbid air interfaces to forward packets to bridging terminals. This can reduce the number of packets transmitted on the air interfaces and improve the air interface performance.

Example

# Forbid an air interface to forward packets to bridging terminals in the traffic profile p1.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] traffic-profile name p1
[HUAWEI-wlan-traffic-prof-p1] traffic-optimize sta-bridge-forward disable