traffic behavior

Function

The traffic behavior command creates a traffic behavior and displays the traffic behavior view, or directly displays the view of an existing traffic behavior.

The undo traffic behavior command deletes a traffic behavior.

By default, no traffic behavior is created in the system.

Format

traffic behavior behavior-name

undo traffic behavior behavior-name

Parameters

Parameter	Description	Value
behavior-name	Specifies the name of a traffic behavior.	The value is a string of 1 to 64 case-sensitive characters, spaces not supported. When double quotation marks are used around the string, spaces are allowed in the string.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

A traffic classifier is used to differentiate services and must be associated with a flow control or resource allocation action such as packet filtering, traffic policing, and re-marking. The actions constitute a traffic behavior. The traffic behavior command creates a traffic behavior.

Follow-up Procedure

Configure an action in the traffic behavior view. For example, run the car (traffic behavior view) command to configure the traffic policing action.

Precautions

To delete a traffic behavior, unbind the traffic policy containing the traffic behavior from the system, an interface, or a VLAN where the traffic policy is applied and unbind the traffic behavior from the traffic classifier. To modify only actions in a traffic behavior, you do not need to unbind the traffic policy containing the traffic behavior from the system, an interface, or a VLAN.

On the device, a maximum of 256 traffic behaviors can be created and multiple traffic actions can be configured in a traffic behavior.

Example

# Create the traffic behavior b1 and enter the traffic behavior view.

<HUAWEI> system-view
[HUAWEI] traffic behavior b1
[HUAWEI-behavior-b1]