undo ap

Function

The undo ap command deletes an AP.

Format

undo ap { ap-name ap-name | ap-id ap-list | ap-mac ap-mac | ap-group group-name | all }

Parameters

Parameter	Description	Value
ap-name ap-name	Deletes the AP with a specified AP name.	The AP name must exist.
ap-id ap-list	Deletes APs with the specified IDs in a batch.	The value is a string of 1 to 255 characters. When multiple APs are selected, use commas (,) or hyphens (-) to separate AP IDs. For example, 5,8,10-13,20 indicates the list of APs with IDs 5, 8, 10, 11, 12, 13, and 20.
ap-mac ap-mac	Deletes the AP with a specified MAC address.	The AP's MAC address must exist.
ap-group group-name	Deletes the APs in a specified AP group.	The AP group must exist.
all	Deletes all APs.	-

Views

WLAN view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

If you do not want a specified AP to go online on the AC, run this command to delete the AP from the AC. After the AP is deleted, the AP goes offline from the AC.

Configuration Impact

Deleting an AP will interrupt services of STAs connected to the AP.

Precautions

If an AP is being upgraded, stays in standby state, or is having the ap-ping command executing, the AP cannot be deleted.

In NETCONF mode, if any of the APs managed by the switch has been registered on the iMaster NCE-Campus, you cannot delete all APs using the undo ap all command. AP registration on the iMaster NCE-Campus indicates that an AP has been online on the iMaster NCE-Campus or the switch successfully synchronizes the configured AP information to the iMaster NCE-Campus.

Example

# Delete the AP named Area_1.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] undo ap ap-name Area_1
Warning: Deleting the AP will interrupt user services. Continue?[Y/N]:y