unlimited-negotiate

Function

The unlimited-negotiate command enables unlimited negotiation for a multicast BFD session.

The undo unlimited-negotiate command disables unlimited negotiation for a multicast BFD session.

By default, unlimited negotiation is disabled for a multicast BFD session.

Only the S5720-EI, S5720-HI, S5730-HI, S5731-H, S5731-S, S5731S-H, S5731S-S, S5732-H, S6720-EI, S6720-HI, S6720S-EI, S6730-H, S6730S-H, S6730-S, and S6730S-S support this command.

Format

unlimited-negotiate

undo unlimited-negotiate

Parameters

None

Views

BFD session view

Default Level

2: Configuration level

Usage Guidelines

If a multicast BFD session is bound to a Layer 3 interface to which the line protocol current state of the interface is Down, the status of the session is set to Down. You can run the unlimited-negotiate command to restart session negotiation. If the link is normal, the session can go Up through negotiation.

Example

# Enable unlimited negotiation for a multicast BFD session.

<HUAWEI> system-view
[HUAWEI] bfd
[HUAWEI-bfd] quit
[HUAWEI] bfd atob bind peer-ip default-ip interface gigabitethernet 0/0/1
[HUAWEI-bfd-session-atob] unlimited-negotiate