update schedule

Function

The update schedule command sets scheduled update time for the signature database.

By default, the scheduled update time for the signature database is not set.

Format

update schedule [ sa-sdb ] [ { daily | weekly { Mon | Tue | Wed | Thu | Fri | Sat | Sun } } time ]

Parameters

Parameter	Description	Value
sa-sdb	Indicates scheduled update time of the application identification signature database.	-
daily	Indicates daily update of a application identification signature database.	-
weekly { Mon \| Tue \| Wed \| Thu \| Fri \| Sat \| Sun }	Indicates weekly update of a application identification signature database.	-
time	Specifies the time in a day for the scheduled update of the application identification signature database.	The format is hh:mm. The hour and minute are separated by a colon (:). The hh value is an integer ranging from 0 to 23 and the mm value is an integer ranging from 0 to 59.

Views

System view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

If time is not specified, the update schedule can update the application identification signature database daily at any point during the time range 22:00 to 08:00.

Prerequisites

Before running this command, you must run the defence engine enable command to enable the IAE.

Example

# Configure a scheduled update of the application identification signature database at 02:00 every Wednesday.

<HUAWEI> system-view
[HUAWEI] defence engine enable
[HUAWEI] update schedule weekly Wed 02:00

# Configure a scheduled update of the application identification signature database at 03:00 every day.

<HUAWEI> system-view
[HUAWEI] defence engine enable
[HUAWEI] update schedule daily 03:00