upload auto

Function

The upload auto command enables a device to automatically upload performance statistics files to a server.

The undo upload auto command disables a device from automatically uploading performance statistics files to a server.

By default, a device does not automatically upload performance statistics files to a server.

Format

upload auto request-name

undo upload auto

Parameters

Parameter	Description	Value
request-name	Specifies the name of a request for uploading performance statistics files to a server.	The value is a string of 1 to 31 case-sensitive characters, spaces not supported. The string contains letters, digits, and underscores (_), and must start with letters or digits.

Views

Performance statistics collection task view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

The system periodically generates performance statistics files based on the collected performance statistics. To enable the device to automatically upload performance statistics files to the PM server at a specific interval, run the upload auto command.

Prerequisites

A request for uploading performance statistics files to the PM server has been created using the upload-config request-name server server-name command.

Example

# Configure the device to automatically upload statistics files to a PM server.

<HUAWEI> system-view
[HUAWEI] pm
[HUAWEI-pm] pm-server ftpserver
[HUAWEI-pm-server-ftpserver] quit
[HUAWEI-pm] upload-config req1 server ftpserver
[HUAWEI-pm] statistics-task task1
[HUAWEI-pm-statistics-task1] upload auto req1