url-parameter
Function
The url-parameter command sets parameters in a URL.
The undo url-parameter command deletes parameters in a URL.
By default, a URL does not carry parameters.
Format
url-parameter { ac-ip ac-ip-value | ac-mac ac-mac }*
undo url-parameter
The command is only supported by the S5730-HI, S5731-H, S5731S-H, S6730-H, S6730S-H, S5732-H, S6720-HI, and S5720-HI.
Parameters
Parameter |
Description |
Value |
|---|---|---|
ac-ip ac-ip-value |
Specifies the IP address of the ac carried in the URL and sets the parameter name displayed in the URL. In the wireless access scenario, the value of ac-ip carried in the URL is the CAPWAP gateway address. |
The value is a string of 1 to 16 case-sensitive characters without spaces. If the string is enclosed in double quotation marks (" "), the string can contain spaces. |
ac-mac ac-mac-value |
Specifies the MAC address of the ac carried in the URL and sets the parameter name displayed in the URL. |
The value is a string of 1 to 16 case-sensitive characters without spaces. If the string is enclosed in double quotation marks (" "), the string can contain spaces. |
Usage Guidelines
This command is available to aid upgrade compatibility. It can only be run during the configuration restoration phase of the upgrade. After the upgrade, this command is no longer supported, and it is replaced by the following command in the URL template view:
url-parameter { device-ip device-ip-value | device-mac device-mac }*