user-queue single-user-mode

Function

The user-queue single-user-mode command sets the user queue scheduling mode to single-user mode.

The undo user-queue single-user-mode command restores the default configuration.

By default, user queue scheduling uses the user sharing mode.

Only the S5720-HI supports this command.

Format

user-queue single-user-mode

undo user-queue single-user-mode

Parameters

None

Views

System view, AAA domain view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

When HQoS is used to implement fine-granularity scheduling for authenticated users, the same user queue is used for scheduling traffic of users who use the same account for login by default. To implement fine-granularity scheduling for each user, run the user-queue single-user-mode command to set the user queue scheduling mode to single-user mode.

Follow-up Procedure

Run the user-queue command to create a user queue in the QoS profile to implement HQoS scheduling. The RADIUS server then delivers the QoS profile for new online users.

Precautions

This command is not supported for wireless users.
If you run this command in the system view, the configuration takes effect for all new users who go online on this device. If you run this command in an AAA domain, the configuration takes effect only for the new users in the AAA domain.
When HQoS-based authorization is configured for wireless users, only the single-user mode is supported for user queue scheduling.

Example

# Set the user queue scheduling mode to single-user mode in the system view.

<HUAWEI> system-view
[HUAWEI] user-queue single-user-mode

# Set the user queue scheduling mode to single-user mode in the AAA domain view.

<HUAWEI> system-view
[HUAWEI] aaa
[HUAWEI-aaa] domain huawei
[HUAWEI-aaa-domain-huawei] user-queue single-user-mode