utmost-power

Function

The utmost-power disable command disables radios from sending packets at the maximum power.

The utmost-power enable command enables radios to send packets at the maximum power.

The undo utmost-power command restores the adaptive mode for radios to send packets.

By default, radios are enabled to send packets in adaptive mode.

Format

utmost-power { disable | enable }

undo utmost-power

Parameters

None

Views

2G radio profile view, 5G radio profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

This command is valid for all country codes. You can run the utmost-power enable command to enable radios to send packets at the maximum power or run the utmost-power disable command to enable radios to send packets at the power specified by the country code. After you run the undo utmost-power command to restore the adaptive mode, radios send packets at the maximum power if the country code is CN or at the power specified by other country codes.

Precautions

802.11ac and 802.11ax APs can send packets at the maximum power.

Example

# Disable radios from sending packets at maximum power.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] radio-2g-profile name default
[HUAWEI-wlan-radio-2g-prof-default] utmost-power disable