vap-profile

Function

The vap-profile command binds a VAP profile to a radio.

The undo vap-profile command unbinds a VAP profile from a radio.

By default, no VAP profile is bound to a radio.

Format

vap-profile profile-name wlan wlan-id radio { radio-id | all } [ service-vlan { vlan-id vlan-id | vlan-pool pool-name } ]

undo vap-profile profile-name wlan wlan-id radio { radio-id | all }

radio { radio-id | all } is supported only in the AP group view and AP view.

Parameters

Parameter	Description	Value
profile-name	Specifies the name of a VAP profile.	The VAP profile must exist.
wlan wlan-id	Specifies the WLAN ID of a VAP.	The value is an integer that ranges from 1 to 16. NOTE: The WLAN ID for the WDS service can be 13 or 14. The WLAN ID for the Mesh service is 16. The WLAN ID for the offline management VAP configuration is 15 or an integer that ranges from 1 to 12. For the AP2030DN, each radio supports a maximum of eight VAPs. If the value of wlan-id exceeds 8, the configuration cannot take effect and the AP cannot generate wireless signals.
radio	Specifies a radio.	-
radio-id	Specifies a radio ID.	The value is an integer that ranges from 0 to 2. Three radios are available only on the AirEngine 8760-X1-PRO, AirEngine 8760R-X1E, AirEngine 6760-X1, AirEngine 6760-X1E, AirEngine 5760-51, AP4030TN, AP4051TN, AP8050TN-HD.
all	Specifies all radios.	-
service-vlan	Specifies a service VLAN.	-
vlan-id vlan-id	Specifies a VLAN ID.	The VLAN ID must exist.
vlan-pool pool-name	Specifies a VLAN pool name.	The VLAN pool name must exist.

Views

AP group view, AP view, AP radio view, AP group radio view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After you create a VAP profile using the vap-profile (WLAN view) command, bind it to a radio so that the VAP profile can take effect.

In some scenarios, users hop to configure only one VAP for all APs that use different service VLANs. To simplify configuration, you can configure the service-vlan parameter to define a service VLAN when binding a VAP profile. A user-defined service VLAN has a higher priority than that configured using the service-vlan command.

Precautions

After a VAP profile is bound to a radio, parameter settings in the VAP profile apply to the radio using the profile.

Example

# Create the VAP profile vap1 and bind it to AP group group1.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] vap-profile name vap1
[HUAWEI-wlan-vap-prof-vap1] quit
[HUAWEI-wlan-view] ap-group name group1
[HUAWEI-wlan-ap-group-group1] vap-profile vap1 wlan 1 radio 0