verbose

Function

The verbose command enables the verbose function on the FTP client.

The undo verbose command disables the verbose function.

By default, the verbose function is enabled.

Format

verbose

undo verbose

Parameters

None

Views

FTP client view

Default Level

3: Management level

Usage Guidelines

After the verbose function is enabled, all FTP response messages are displayed on the FTP client.

Example

# Enable the verbose function.

<HUAWEI> ftp 10.137.217.201
Trying 10.137.217.201 ...
Press CTRL+K to abort
Connected to 10.137.217.201.
220 FTP service ready.
User(10.137.217.201:(none)):huawei
331 Password required for huawei.
Enter password:
230 User logged in.

[ftp] verbose
Info: Succeeded in switching verbose on.
[ftp] get h1.txt
200 Port command okay.
150 Opening ASCII mode data connection for h1.txt.

226 Transfer complete.
FTP: 69 byte(s) received in 0.160 second(s) 431.25byte(s)/sec.

# Disable the verbose function.

[ftp] undo verbose
Info: Succeeded in switching verbose off.
[ftp] get h1.txt

FTP: 69 byte(s) received in 0.150 second(s) 460.00byte(s)/sec.