verify-source (RIP)

Function

The verify-source command enables check on source IP addresses in RIP Update packets.

The undo verify-source command disables check on source IP addresses in RIP Update packets.

By default, the source IP addresses in RIP Update packets are checked.

Format

verify-source

undo verify-source

Parameters

None

Views

RIP view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After the verify-source command is executed, RIP checks whether the IP addresses of interfaces that send and receive the Update packets are on the same network segment. If not, the device does not process the packets.

It is not recommended that you disable source address check.

Example

# Enable source address check in RIP 100.

<HUAWEI> system-view
[HUAWEI] rip 100
[HUAWEI-rip-100] verify-source