The vht a-msdu max-frame-num command sets the maximum number of subframes that can be aggregated into an A-MSDU at one time.
The undo vht a-msdu max-frame-num command restores the default maximum number of subframes that can be aggregated into an A-MSDU at one time.
By default, a maximum of two subframes can be aggregated into an A-MSDU at one time.
This command does not take effect on AirEngine series APs (except the AirEngine 5760-10).
Parameter |
Description |
Value |
---|---|---|
max-frame-number |
Specifies the maximum number of subframes that can be aggregated into an A-MSDU at one time. |
The value is an integer ranging from 2 to 15. |
Usage Scenario
Prerequisite
The function of sending 802.11 frames in A-MSDU mode has been enabled using the a-msdu enable command.
Precautions
The function of sending 802.11 frames in A-MSDU mode can only be enabled on the 802.11ac and 802.11ax radios.