vlan statistics
Function
The vlan statistics command configures the way to collect VLAN traffic statistics.
The undo vlan statistics command restores the default way to collect VLAN traffic statistics.
By default, VLAN traffic statistics are collected by packets.
Format
vlan statistics { by-bytes | by-packets }
undo vlan statistics { by-bytes | by-packets }
Only the S2720-EI, S5720I-SI, S5720-LI, S5720S-LI, S5720S-SI, S5720-SI, S5730S-EI, S5730-SI, S6720-LI, S6720S-LI, S6720S-SI, and S6720-SI support this command.
Parameters
Parameter |
Description |
Value |
|---|---|---|
by-bytes |
Collects VLAN traffic statistics by bytes. |
- |
by-packets |
Collects VLAN traffic statistics by packets. |
- |
Usage Guidelines
Usage Scenario
To check the network status or locate network faults, you can use the statistic enable (VLAN view) command to enable traffic statistics collection in VLANs.
After traffic statistics collection is enabled in a VLAN, the switch collects statistics on unicast packets, broadcast packets, and broadcast packets transmitted in the VLAN.
The vlan statistics { by-bytes | by-packets } command configures whether traffic statistics are collected by packet s or bytes.