voice-vlan (service scheme view)

Function

The voice-vlan command enables the voice VLAN in a service scheme.

The undo voice-vlan command restores the default setting.

By default, the voice VLAN is disabled in the service scheme.

Format

voice-vlan

undo voice-vlan

Parameters

None

Views

Service scheme view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

After creating a service scheme using the service-scheme command, you can run the voice-vlan command to enable the voice VLAN in the service scheme. The voice user assigned with the service scheme will be added to the voice VLAN and obtain network resources in the VLAN.

Precautions

An authorized VLAN cannot be delivered to online Portal users.
To make this command take effect, you must have run the voice-vlan enable command to configure a specified VLAN as the voice VLAN and enable the voice VLAN on the interface.
If the user access mode is set to multi-share, authorized voice VLANs are not supported.
This command takes effect only to authorization of users who fail to be authenticated (configured using the authentication eventauthen-failaction authorize or authentication eventauthen-server-downaction authorize command, and the voice-vlan mac-address command must be run to configure the OUI of the voice VLAN) or voice terminals who can go online without authentication (configured using the authentication device-type voice authorize command).

Example

# Enable the voice VLAN in the service scheme huawei.

<HUAWEI> system-view
[HUAWEI] aaa
[HUAWEI-aaa] service-scheme huawei
[HUAWEI-aaa-service-huawei] voice-vlan