wapi key-update

Function

The wapi key-update command sets the USK and MSK update mode.

The undo wapi key-update command restores the default USK and MSK update mode.

By default, USKs and MSKs are updated based on time.

wapi { usk | msk } key-update { disable | time-based }

undo wapi { usk | msk } key-update

Parameter	Description	Value
usk	Indicates USK update.	-
msk	Indicates MSK update.	-
disable	Disables key update.	-
time-based	Indicates time-based update. You can run the wapi msk and wapi usk commands to respectively set the intervals for updating an MSK and a USK.	-

Security profile view

2: Configuration level

To ensure network security, update keys in a timely manner. There are several key update modes.
The wapi key-update command sets the USK and MSK update mode. If the interval for updating an MSK or a USK is too long, key security cannot be ensured.
If disable is specified, keys will not be updated.

# Set the USK update mode to time-based update.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] security-profile name p1
[HUAWEI-wlan-sec-prof-p1] wapi usk key-update time-based