wds-name

Function

The wds-name command sets a WDS name for a WDS profile.

The undo wds-name command deletes the WDS name of a WDS profile.

By default, the WDS name of a WDS profile is HUAWEI-WLAN-WDS.

Format

wds-name name

undo wds-name

Parameters

Parameter	Description	Value
name	Specifies the character string that indicates the WDS name.	The value is a string of 1 to 32 case-sensitive characters. It does not contain question marks (?) or spaces, and cannot start or end with double quotation marks (" ").

Views

WDS profile view

Default Level

2: Configuration level

Usage Guidelines

A WDS name is similar to an SSID. On a WDS network, an AP radio discovers WDS services provided by other APs based on the WDS name.

Each WDS profile must have a WDS name. The default WDS name of a WDS profile is HUAWEI-WLAN-WDS. You can run the wds-name command to set a WDS name for a WDS profile.

Example

# Create the WDS profile test and set the WDS name of the profile to bridge.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] wds-profile name test
[HUAWEI-wlan-wds-prof-test] wds-name bridge
Warning: This action may cause service interruption. Continue?[Y/N]y