wds-whitelist-profile (AP group radio view or AP radio view)

Function

The wds-whitelist-profile command binds a WDS whitelist profile to an AP radio.

The undo wds-whitelist-profile command unbinds a WDS whitelist profile from an AP radio.

By default, no WDS whitelist profile is bound to an AP radio.

Format

wds-whitelist-profile whitelist-name

undo wds-whitelist-profile

Parameters

Parameter	Description	Value
whitelist-name	Specifies the name of the WDS whitelist profile bound to an AP radio.	The WDS whitelist profile must exist.

Views

AP group radio view, AP radio view

Default Level

2: Configuration level

Usage Guidelines

After a WDS whitelist profile is applied to an AP radio, the AP radio can only set up WDS links with neighboring APs whose MAC addresses are in the WDS whitelist profile. If no WDS whitelist profile is bound to an AP radio, the AP radio can establish WDS links with any neighboring APs.

On a WDS network, a root or middle node controls subnode access by MAC addresses added to the WDS whitelist profile. However, a leaf node does not require a whitelist.

An AP radio can only have one WDS whitelist profile bound. If you run the command multiple times on the same AP radio, the latest configuration overwrites the old one.

Example

# Create the WDS whitelist profile whitelist and add the MAC address 0001-0001-0001 to the whitelist profile. Bind the WDS whitelist profile whitelist to radio 0 of APs in the AP group group1.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] wds-whitelist-profile name whitelist
[HUAWEI-wlan-wds-whitelist-whitelist] peer-ap mac 0001-0001-0001
[HUAWEI-wlan-wds-whitelist-whitelist] quit
[HUAWEI-wlan-view] ap-group name group1
[HUAWEI-wlan-ap-group-group1] radio 0
[HUAWEI-wlan-group-radio-group1/0] wds-whitelist-profile whitelist