wep default-key

Function

The wep default-key command sets the default key ID for WEP authentication or encryption.

The undo wep default-key command restores the default key ID for WEP authentication or encryption.

By default, key 0 is used for WEP authentication or encryption.

wep default-key key-id

undo wep default-key

Parameter	Description	Value
key-id	Specifies the default key ID.	The key ID must exist.

Security profile view

2: Configuration level

A maximum of four WEP keys can be configured, and only one WEP key is used for authentication and encryption. This command specifies which key to use.
After a key ID is specified, the specified key is used for authentication or encryption.
Each AP can have at most four key indexes configured. The key indexes used by different VAPs cannot be the same.
The system displays the message only when the security profile has been bound to the other profiles.

# Set the default key ID to 1.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] security-profile name p1
[HUAWEI-wlan-sec-prof-p1] wep default-key 1