wids manual-contain

Function

The wids manual-contain command manually contains specified devices.

The undo wids manual-contain command disables containment of specified devices.

By default, no device is manually contained.

wids manual-contain device-mac device-mac

undo wids manual-contain { all | device-mac device-mac }

Parameter	Description	Value
device-mac device-mac	Specifies the MAC address of a device to be contained.	The value is in H-H-H format. An H is a hexadecimal number of 4 digits.
all	Contains all devices.	-

WLAN view

2: Configuration level

Usage Scenario

You can run the wids manual-contain command in the WLAN view to manually contain a specified device in a complicated environment.

Precautions

Wireless bridges are not contained.

# Contain the AP with the MAC address of 0004-0004-0004.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] wids manual-contain device-mac 0004-0004-0004