wired-port-profile (AP group view and AP view)

Function

The wired-port-profile command binds an AP wired port profile to an AP or AP group.

The undo wired-port-profile command unbinds an AP wired port profile from an AP or AP group.

By default, the AP wired port profile default is bound to an AP group, but no AP wired port profile is bound to an AP.

Format

wired-port-profile profile-name interface-type interface-number

undo wired-port-profile interface-type interface-number

Parameters

Parameter	Description	Value
profile-name	Specifies the name of an AP wired port profile.	The AP wired port profile must exist.
interface-type interface-number	Specifies the type and number of an AP's wired interface.	-

Views

AP group view, AP view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After you create an AP wired port profile using the wired-port-profile (WLAN view) command, bind it to an AP or AP group so that the AP wired port profile can take effect.

Precautions

After an AP wired port profile is bound to an AP or AP group, parameter settings in the AP wired port profile apply to specified interfaces of all APs using the AP wired port profile.
For APs with cards, the AP wired port profile can take effect only after being applied in the card view. For detailed configuration, see wired-port-profile (IoT card interface view).

Example

# Create the AP wired port profile wired-port1 and bind it to GE0 of APs in AP group group1.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] wired-port-profile name wired-port1
[HUAWEI-wlan-wired-port-wired-port1] quit
[HUAWEI-wlan-view] ap-group name group1
[HUAWEI-wlan-ap-group-group1] wired-port-profile wired-port1 gigabitethernet 0