Installing the Cord End Terminal

Procedure

1. Hold a cord end terminal upright and place it on a terminal jack, as shown in Figure 1. To ensure bump contact and dense connection, place the plain side of the terminal outwards.
   Figure 1 Placing a terminal on a terminal jack vertically
   
   

2. Insert the terminal into the jack vertically, and turn the screw clockwise to fasten the terminal, as shown in Figure 2.
   Figure 2 Feeding the terminal into the jack
   
   
   

   • Ensure that the exposed section of the terminal is less than 2 mm (0.079 in.) in length.
   • Do not press the insulation of the terminal.
   • Insert only one terminal into one jack.

3. Move the cable slightly and ensure that it is securely connected.
4. Before you remove a cord end terminal, loosen the screw counterclockwise.