AM_1.3.6.1.4.1.2011.6.8.2.2.0.6 hwUsedIPReachThreshold

Trap Buffer Description

The number of IP addresses in the IP pool exceeds the threshold. (PoolIndex=[PoolIndex],PoolName=[PoolName])

The number of IP addresses in the address pool exceeded the threshold.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Warning
Mnemonic Code	THRESHOLD
Trap OID	1.3.6.1.4.1.2011.6.8.2.2.0.6
MIB	HUAWEI-IPPOOL-MIB
Alarm ID	0x00F10053
Alarm Name	hwUsedIPReachThreshold
Alarm Type	communicationsAlarm
Raise or Clear	Raise
Match trap	AM_1.3.6.1.4.1.2011.6.8.2.2.0.7 hwUsedIPReachThresholdResume

Trap Buffer Parameters

Parameter	Description
PoolIndex	Address pool index
PoolName	Address pool name

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.6.8.1.1.1.1	hwIPPoolIndex	hwIPPoolIndex
1.3.6.1.4.1.2011.6.8.1.1.1.2	hwIPPoolName	hwIPPoolIndex

Impact on the System

The address pool may be exhausted.

In such a case, new users who are on the same network segment as the address pool cannot go online.

Possible Causes

The number of IP addresses in the address pool exceeded the threshold.

Procedure

1. Run the display ip pool command to view the status of IP addresses in the address pool.

If the address pool contains conflicting IP addresses, go to Step 2.
If some IP addresses in the address pool have not been used, go to Step 3.

2. Run the conflict auto-recycle command to configure the interval for automatically reclaiming conflicting IP addresses. After conflicting IP addresses are reclaimed, these IP addresses become available and can be assigned to clients.

3. Run the recycle command to reclaim the IP addresses for further assignment.