BASE-TRAP_1.3.6.1.4.1.2011.5.25.40.15.2.2.1.4 hwRadiusAcctServerDown

Trap Buffer Description

The communication with the RADIUS accounting server fails. (IpAddress=[IpAddress],Vpn-Instance=[Vpn-Instance],Port=[Port])

The communication with the RADIUS accounting server fails.

In VS mode, this trap is supported only by the admin VS.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Warning
Mnemonic Code	hwRadiusAcctServerDown
Trap OID	1.3.6.1.4.1.2011.5.25.40.15.2.2.1.4
MIB	HUAWEI-BRAS-RADIUS-MIB
Alarm ID	0x0aed2007
Alarm Name	hwRadiusAcctServerDown
Alarm Type	communicationsAlarm
Raise or Clear	Raise
Match trap	BASE-TRAP_1.3.6.1.4.1.2011.5.25.40.15.2.2.1.3 hwRadiusAcctServerUp

Trap Buffer Parameters

Parameter	Description
IpAddress	Indicates the IP address of the RADIUS accounting server
Vpn-Instance	Indicates the VPN instance on the RADIUS accounting server
Port	Indicates the interface number of the RADIUS accounting server

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.40.15.2.1.1	hwStateChangeServerIp	-
1.3.6.1.4.1.2011.5.25.40.15.2.1.2	hwStateChangeServerVrf	-
1.3.6.1.4.1.2011.5.25.40.15.2.1.3	hwStateChangeServerPort	-

Impact on the System

Accounting on online users may fail

Possible Causes

The route between the device and the RADIUS accounting server was unreachable or the RADIUS accounting server did not respond to the request of the device within the timeout period

Procedure

1.Run the ping command to check whether the RADIUS server is reachable. - If so, go to Step 3. - If not, go to Step 2. 2.Run the display interface command to check whether the interface is Up. - If so, go to Step 3. - If not, verify that the physical link is connected properly. 3.Run the display current-configuration command to check whether the RADIUS server is correctly configured. - If so, go to Step 4. - If not, see the Configuration Guide-Use Access to modify configurations on the RADIUS server. 4.Collect the alarm information, log information, and configuration information, and then contact the technical support personnel.