Session changes to DOWN. (Index=[Index], ConfigurationName=[ConfigurationName], BindIfIndex=[BindIfIndex], BindIfName=[BindIfName], Diagnosis=[Diagnosis], BindVrfIndex=[BindVrfIndex], BindVpnName=[BindVpnName], SessionType=[SessionType], BindType=[BindType], StaticLspName=[StaticLspName], PwSecondary=[PwSecondary], VcId=[VcId], VsiName=[VsiName], VsiPeerAddress=[VsiPeerAddress], DiscrAuto=[DiscrAuto], PeerIpv6=[PeerIpv6], Ipv6NextHop=[Ipv6NextHop])
The BFD IPv6 session went Down.
Trap Attribute | Description |
---|---|
Alarm or Event |
Event |
Trap Severity |
Warning |
Mnemonic Code |
hwBfdIPv6SessDown |
Trap OID |
1.3.6.1.4.1.2011.5.25.38.3.13 |
MIB |
HUAWEI-BFD-MIB |
Alarm ID |
This is an event trap and does not involve alarm ID. |
Alarm Name |
This is an event trap and does not involve alarm name. |
Alarm Type |
This is an event trap and does not involve alarm type. |
Raise or Clear |
This is an event trap and does not involve alarm generation or clearance. |
Match trap |
- |
Parameter | Description |
---|---|
Index |
BFD session ID. |
ConfigurationName |
BFD session name. |
BindIfIndex |
Bound interface index. |
BindIfName |
Bound interface name. |
Diagnosis |
Session diagnostic word
|
BindVrfIndex |
Index of the bound VPN instance. |
BindVpnName |
Name of the bound VPN instance. |
SessionType |
Indicates the type of a session.
|
BindType |
Bound type:
|
StaticLspName |
Static LSP name The value is always -. |
PwSecondary |
Secondary PW flag.
|
VcId |
VC ID. |
VsiName |
VSI name. |
VsiPeerAddress |
VSI peer address. |
DiscrAuto |
Static auto-negotiation discriminator. |
PeerIpv6 |
Bound destination IPv6 address. |
Ipv6NextHop |
Next hop IPv6 address. |
VB OID | VB Name | VB Index |
---|---|---|
1.3.6.1.4.1.2011.5.25.38.2.3.1.4 |
hwBfdSessCfgName |
hwBfdSessIndex |
1.3.6.1.4.1.2011.5.25.38.2.3.1.6 |
hwBfdSessBindIfIndex |
hwBfdSessIndex |
1.3.6.1.4.1.2011.5.25.38.2.3.1.7 |
hwBfdSessBindIfName |
hwBfdSessIndex |
1.3.6.1.4.1.2011.5.25.38.2.3.1.18 |
hwBfdSessDiag |
hwBfdSessIndex |
1.3.6.1.4.1.2011.5.25.38.2.3.1.20 |
hwBfdSessVrfIndex |
hwBfdSessIndex |
1.3.6.1.4.1.2011.5.25.38.2.3.1.21 |
hwBfdSessVPNName |
hwBfdSessIndex |
1.3.6.1.4.1.2011.5.25.38.2.3.1.22 |
hwBfdSessType |
hwBfdSessIndex |
1.3.6.1.4.1.2011.5.25.38.2.3.1.26 |
hwBfdSessBindType |
hwBfdSessIndex |
1.3.6.1.4.1.2011.5.25.38.2.3.1.28 |
hwBfdSessStaticLspName |
hwBfdSessIndex |
1.3.6.1.4.1.2011.5.25.38.2.3.1.30 |
hwBfdSessPWSecondaryFlag |
hwBfdSessIndex |
1.3.6.1.4.1.2011.5.25.38.2.3.1.32 |
hwBfdSessVcId |
hwBfdSessIndex |
1.3.6.1.4.1.2011.5.25.38.2.3.1.33 |
hwBfdSessVsiName |
hwBfdSessIndex |
1.3.6.1.4.1.2011.5.25.38.2.3.1.34 |
hwBfdSessVsiPeerAddr |
hwBfdSessIndex |
1.3.6.1.4.1.2011.5.25.38.2.3.1.35 |
hwBfdSessDiscrAuto |
hwBfdSessIndex |
1.3.6.1.4.1.2011.5.25.38.2.3.1.36 |
hwBfdSessPeerIpv6Addr |
hwBfdSessIndex |
1.3.6.1.4.1.2011.5.25.38.2.3.1.38 |
hwBfdSessIpv6NextHop |
hwBfdSessIndex |
1. Run the display interface command to check whether the physical state of the interface bound to the session is Up.
2. Check whether the session state is automatically restored.
3. Run the display bfd session all command to check whether the BFD sessions are deleted on the two ends.
4. Run the ping ip-address command to check whether the link monitored by the BFD session is working properly.
5. Collect log information and configuration information, and then contact technical support personnel.
6. End.