BGP_1.3.6.1.4.1.2011.5.25.177.1.3.35 bgpPeerAfPerRouteExceed

Trap Buffer Description

The routes number of the specified type received from peers in a BGP address family reached the maximum value. (Address Family=[AddressFamily], RouteType=[RouteType], MaxRouteNumber=[RouteLimitNum], BGP instance name=[InstanceName])

The routes number of the specified type received from peers in a BGP address family reached the maximum value.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Critical
Mnemonic Code	hwBgpPeerAddrFamilyPerRouteExceed
Trap OID	1.3.6.1.4.1.2011.5.25.177.1.3.35
MIB	HUAWEI-BGP-VPN-MIB
Alarm ID	0x00f103ba
Alarm Name	hwBgpPeerAddrFamilyPerRouteExceed
Alarm Type	communicationsAlarm
Raise or Clear	Raise
Match trap	BGP_1.3.6.1.4.1.2011.5.25.177.1.3.36 bgpPeerAfPerRouteExceedClear

Trap Buffer Parameters

Parameter	Description
AddressFamily	Address family.
RouteType	Route type.
RouteLimitNum	The maximum route number.
InstanceName	BGP instance name. "-" indicates the default BGP instance, and other values indicate multiple instances.

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.177.1.2.2.1.5	hwBgpVrfAddressFamily	hwBgpVrfRouteType hwBgpVrfInstName hwBgpVrfAddressFamily
1.3.6.1.4.1.2011.5.25.177.1.2.1.5	hwBgpRouteType	-
1.3.6.1.4.1.2011.5.25.177.1.2.1.3	hwBgpRouteMaxNum	-
1.3.6.1.4.1.2011.5.25.177.1.5.1.1.1	hwBgpProcessName	hwBgpProcessName

Impact on the System

The routes number of the specified type received from peers in the address family has reached the specification, and no more new routes of specified type can be received.

Possible Causes

The routes number of the specified type received from peers in a BGP address family reached the maximum value.

Procedure

1. Reduce the routes number of specified type sent by the peer end. Then, check whether the alarm is cleared. That is, check whether the matching clear alarm (hwBgpPeerAddrFamilyPerRouteExceedClear) is generated. - If the clear alarm is generated, go to Step 3. - If the clear alarm is not generated, go to Step 2. 2. Collect alarm information and configuration information, and then contact technical support personnel. 3. End.