BRASAAA_1.3.6.1.4.1.2011.5.2.2.2.0.24 hwIPv6NDRAPrefixLowerlimitWarningAlarm
Trap Buffer Description
The IPv6 NDRA prefix usage of the domain [domainName] fell below the lower threshold. (Domain index = [domainIndex],MinThreshold=[threshold])
The IPv6 NDRA prefix usage of the domain fell below the lower threshold.
In VS mode, this trap is supported only by the admin VS.
Trap Attributes
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Alarm |
Trap Severity |
Warning |
Mnemonic Code |
hwIPv6NDRAPrefixLowerlimitWarningAlarm |
Trap OID |
1.3.6.1.4.1.2011.5.2.2.2.0.24 |
MIB |
HUAWEI-AAA-MIB |
Alarm ID |
0x0aeb2018 |
Alarm Name |
hwIPv6NDRAPrefixLowerlimitWarningAlarm |
Alarm Type |
qualityOfServiceAlarm |
Raise or Clear |
Raise |
Match trap |
BRASAAA_1.3.6.1.4.1.2011.5.2.2.2.0.25 hwIPv6NDRAPrefixLowerlimitWarningResume |
Trap Buffer Parameters
| Parameter | Description |
|---|---|
domainName |
Name of the domain |
domainIndex |
Index of the domain |
threshold |
Lower limit, in percentages. If the value is 80,the threshold is 80% |
VB Parameters
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.2.2.1.1 |
hwDomainIndex |
- |
1.3.6.1.4.1.2011.5.2.1.4.1.1 |
hwDomainName |
hwDomainName |
1.3.6.1.4.1.2011.5.2.1.47.1.4 |
hwIPv6PoolLowerLimitWarningThreshold |
hwDomainName |
Procedure
1.Run the display domain domain-name command in the system view to check whether the lower limit is appropriate.
- If the lower limit is too high, go to Step 2.
- If the lower limit is appropriate, go to Step 3.
2.Run the ipv6-warning-threshold lower-limit command in the AAA domain view to reconfigure the lower limit.
3.Run the display domain domain-name command in the system view to check the current IPv6 address usage.
- If the IPv6 address usage falls to or approaches the lower limit, run the display aaa offline-record brief command to check whether the logout reason is User request to offline.
- a.If the logout reason is User request to offline, no action is required.
- b.If the logout reason is not User request to offline, contact technical support personnel.
- If the IPv6 address usage is an appropriate value, go to Step 4.
4.Collect trap, log, and configuration information, and contact technical support personnel.
5.End.