BRASAM_1.3.6.1.4.1.2011.6.8.2.2.0.16 hwPoolGroupUsedIPExhaust
Trap Buffer Description
The number of IP addresses in the IP pool group is exhausted. (PoolGroupNo.=[PoolGroupNo],PoolGroupName=[PoolGroupName])
The IP addresses in an IP address pool group were exhausted and generate an alarm.
In VS mode, this trap is supported only by the admin VS.
Trap Attributes
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Alarm |
Trap Severity |
Warning |
Mnemonic Code |
hwPoolGroupUsedIPExhaust |
Trap OID |
1.3.6.1.4.1.2011.6.8.2.2.0.16 |
MIB |
HUAWEI-IPPOOL-MIB |
Alarm ID |
0x0ae9200b |
Alarm Name |
hwPoolGroupUsedIPExhaust |
Alarm Type |
equipmentAlarm |
Raise or Clear |
Raise |
Match trap |
BRASAM_1.3.6.1.4.1.2011.6.8.2.2.0.17 hwPoolGroupUsedIPExhaustResume |
Trap Buffer Parameters
| Parameter | Description |
|---|---|
PoolGroupNo |
Index of an address pool group. |
PoolGroupName |
Name of an address pool group. |
VB Parameters
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.6.8.2.1.4 |
hwIPPoolGroupIndex |
- |
1.3.6.1.4.1.2011.6.8.1.10.1.1 |
hwIPPoolGroupName |
hwIPPoolGroupName |
Procedure
1. Run the ip-pool command in the IP address pool group view to bind IP address pools that have many available addresses to the IP address pool group. Or, run the section section-num start-ip-address [ end-ip-address ] command in the view of an address pool that has been bound to the IP address pool group to increase the number of IP addresses. Check whether the alarm is cleared.
- If the alarm is cleared, go to Step 3.
- If the alarm persists, go to Step 2.
2. Collect alarm information, log information and configuration information, and then contact Huawei technical support personnel.
3. End.