BRASAM_1.3.6.1.4.1.2011.6.8.2.2.0.18 hwUsedIPv6AddressAlarm

Trap Buffer Description

The number of IPv6 addresses in the IPv6 pool reached the threshold. (IPv6PoolIndex=[IPv6PoolIndex],IPv6PoolName=[IPv6PoolName])

The number of IPv6 addresses in the IPv6 pool reached the threshold.

In VS mode, this trap is supported only by the admin VS.

This alarm is supported only on NetEngine 8000 F1A.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Warning
Mnemonic Code	hwUsedIPv6AddressAlarm
Trap OID	1.3.6.1.4.1.2011.6.8.2.2.0.18
MIB	HUAWEI-IPPOOL-MIB
Alarm ID	0x0ae92007
Alarm Name	hwUsedIPv6AddressAlarm
Alarm Type	equipmentAlarm
Raise or Clear	Raise
Match trap	BRASAM_1.3.6.1.4.1.2011.6.8.2.2.0.19 hwUsedIPv6AddressAlarmResume

Trap Buffer Parameters

Parameter	Description
IPv6PoolIndex	Index of address pool.
IPv6PoolName	Name of address pool.

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.6.8.1.17.1.1	hwIPv6PoolIndex	hwIPv6PoolIndex
1.3.6.1.4.1.2011.6.8.1.17.1.2	hwIPv6PoolName	hwIPv6PoolIndex

Impact on the System

Services will not be affected. However, the alarm needs attention. If the percentage continues to increase, IPv6 addresses will be exhausted and users cannot obtain addresses from the IPv6 address pool.

Possible Causes

The user number has passed the threshold.

Procedure

1. Check the usage of the IPv6 address pool bound to the domain and check whether addresses are adequate for users who access the Internet through this domain.

If the addresses are enough, delete the alarm manually.
If the addresses are not enough, go to Step 2.

2. Bind a new IPv6 address pool to the domain.

3. Check whether the alarm persists.

If the alarm persists, go to Step 4.
If not, go to Step 5.

4. Collect alarm information, log information and configuration information, and then contact technical support personnel.

5. End.