BRASAM_1.3.6.1.4.1.2011.6.8.2.2.0.24 hwIPPoolDAPSubnetFull

Trap Buffer Description

The number of address segments dynamically allocated to the device reached the upper limit allowed by the dynamic address pool. (PoolName=[PoolName],DAPName=[DAPName],UP-Group=[UpGroup])

The number of address segments requested by the dynamic address pool reached the threshold.

In VS mode, this trap is supported only by the admin VS.

This alarm is supported only on NetEngine 8000 F1A.

Trap Attributes

Trap Attribute Description

Alarm or Event

Event

Trap Severity

Warning

Mnemonic Code

hwIPPoolDAPSubnetFull

Trap OID

1.3.6.1.4.1.2011.6.8.2.2.0.24

MIB

HUAWEI-IPPOOL-MIB

Alarm ID

This is an event trap and does not involve alarm ID.

Alarm Name

This is an event trap and does not involve alarm name.

Alarm Type

This is an event trap and does not involve alarm type.

Raise or Clear

This is an event trap and does not involve alarm generation or clearance.

Match trap

-

Trap Buffer Parameters

Parameter Description

PoolName

Address pool name.

DAPName

Name of the DAP.

UpGroup

Index of a vBRAS-UP group. If the value of UP-Group is 0, no vBRAS-UP group exists.

PoolIndex

Address pool index.

VB Parameters

VB OID VB Name VB Index

1.3.6.1.4.1.2011.6.8.1.1.1.2

hwIPPoolName

hwIPPoolIndex

1.3.6.1.4.1.2011.6.8.2.1.7

hwIPPoolDAPName

-

Impact on the System

Applying for address segments fails, and users may fail to go online.

Possible Causes

The number of address segments requested by the dynamic address pool has reached 256.

Procedure

Replan dynamic address pools.
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >