BRASUM_1.3.6.1.4.1.2011.5.25.40.1.3.2.7 hwIpv4FramedRouteThresholdAlarm

Trap Buffer Description

The ipv4 framed route usage exceeds the upper threshold. (ipv4FramedRouteUsage=[ipv4FramedRouteUsage])

The ipv4 framed route usage exceeds the upper threshold.

In VS mode, this trap is supported only by the admin VS.

This alarm is supported only on NetEngine 8000 F1A.

Trap Attributes

Trap Attribute Description

Alarm or Event

Alarm

Trap Severity

Warning

Mnemonic Code

hwIpv4FramedRouteThresholdAlarm

Trap OID

1.3.6.1.4.1.2011.5.25.40.1.3.2.7

MIB

HUAWEI-BRAS-SRVCFG-INTERFACE-MIB

Alarm ID

0x00F102ac

Alarm Name

hwIpv4FramedRouteThresholdAlarm

Alarm Type

communicationsAlarm

Raise or Clear

Raise

Match trap

BRASUM_1.3.6.1.4.1.2011.5.25.40.1.3.2.8 hwIpv4FramedRouteThresholdAlarmResume

Trap Buffer Parameters

Parameter Description

ipv4FramedRouteUsage

Usage of the IPv4 routes generated based on the Framed-Route attribute

VB Parameters

VB OID VB Name VB Index

1.3.6.1.4.1.2011.5.25.40.1.3.1.9

hwIpv4FramedRouteUsage

-

Impact on the System

Services will not be affected.

Possible Causes

The number of IPv4 routes generated based on the RADIUS-delivered Framed-Route attribute exceeded 90% of the specification.

Procedure

1.Replan networking so that the number of IPv4 routes generated based on the Frame-Route attribute falls below 80% of the specification. Then, check whether the trap is cleared.

  • If the trap is cleared, go to step 3.
  • If the trap persists, go to step 2.

2.Collect trap, log, and configuration information and contact technical support engineers.

3.End

Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >