BRASVSM_1.3.6.1.4.1.2011.5.25.40.9.250.2.2 hwVsmEDSGApplyCarResourceFailAlarm

Trap Buffer Description

Failed to apply for CAR resources for the EDSG.(Slot = [Slot])

The EDSG service failed to be activated because the board's CAR resources were insufficient.

In VS mode, this trap is supported only by the admin VS.

This alarm is supported only on NetEngine 8000 F1A.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Event
Trap Severity	Warning
Mnemonic Code	EDSGApplyCarResourceFailAlarm
Trap OID	1.3.6.1.4.1.2011.5.25.40.9.250.2.2
MIB	HUAWEI-BRAS-VSM-MIB
Alarm ID	This is an event trap and does not involve alarm ID.
Alarm Name	This is an event trap and does not involve alarm name.
Alarm Type	This is an event trap and does not involve alarm type.
Raise or Clear	This is an event trap and does not involve alarm generation or clearance.
Match trap	-

Trap Buffer Parameters

Parameter	Description
Slot	Slot Num.

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.40.9.250.1.2	hwVsmSlot	-

Impact on the System

The existing services are not affected, but new access users' value-added service resources fail to be applied for and the EDSG service fails to be activated.

Possible Causes

When the EDSG service used CAR for rate limit, the number of CAR resources that were requested for EDSG service activation exceeded the upper limit.

Procedure

1. Add an interface board and check whether the trap is cleared.

If the trap is cleared, go to Step 3.
If the trap persists, go to Step 2.

2. Collect trap, log, and configuration information, and contact technical support personnel.

3. End.