CONFIGURATION_1.3.6.1.4.1.2011.6.10.2.17 hwCfgConfigChangeLog

Trap Buffer Description

The configuration changed. (Internal change =[isInner], User name =[username], Session ID =[ssnId], Command source address =[srcAddress], Storage type =[datastoreType], Terminal type =[termninalType])

The configuration changed.

In VS mode, this trap is supported only by the admin VS.

Trap Attributes

Trap Attribute Description

Alarm or Event

Event

Trap Severity

Informational

Mnemonic Code

NETCONF_CONFIG_CHANGE_EVENT

Trap OID

1.3.6.1.4.1.2011.6.10.2.17

MIB

HUAWEI-CONFIG-MAN-MIB

Alarm ID

This is an event trap and does not involve alarm ID.

Alarm Name

This is an event trap and does not involve alarm name.

Alarm Type

This is an event trap and does not involve alarm type.

Raise or Clear

This is an event trap and does not involve alarm generation or clearance.

Match trap

-

Trap Buffer Parameters

Parameter Description

isInner

Whether the change is an internal change.

  • 0: non-internal change, indicating that the change is caused by user operations.
  • 1: internal change, which is not caused by user operations.

username

User name for initiating a configuration change.

ssnId

Session ID for initiating a configuration change.

srcAddress

Source address for initiating a configuration change.

datastoreType

Storage DB type for initiating a configuration change:

  • 1: RDB change.
  • 2: CDB change.
  • 3: Startup configuration file change.

termninalType

Terminal type for initiating a configuration change:

  • 0: CLI
  • 1: SNMP
  • 2: NETCONF
  • 7: MML
  • 65535: internal change, such as board loading on a device.

isInnerTrap

Internal change or not.

ssnIdTrap

Session ID for initiating a configuration change.

TerminalTrap

Terminal type for initiating a configuration change.

VB Parameters

VB OID VB Name VB Index

1.3.6.1.4.1.2011.6.10.1.5.6

hwCfgConfigChangeIsInner

-

1.3.6.1.4.1.2011.6.10.1.5.7

hwCfgConfigChangeUserName

-

1.3.6.1.4.1.2011.6.10.1.5.8

hwCfgConfigChangeSessionId

-

1.3.6.1.4.1.2011.6.10.1.5.9

hwCfgConfigChangeSrcAddress

-

1.3.6.1.4.1.2011.6.10.1.5.10

hwCfgConfigChangeStorageType

-

1.3.6.1.4.1.2011.6.10.1.5.11

hwCfgConfigChangeTerminalType

-

Impact on the System

Services are not affected.

Possible Causes

The running configuration or configuration file used for the next startup was changed by a user or in the system.

Procedure

This log message is informational only, and no action is required.
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >