CONFIGURATION_1.3.6.1.4.1.2011.6.10.2.7 hwCfgRestoreFail

Failed to restore system configurations.(Result=[Result])

System configurations failed to be restored.

In VS mode, this trap is supported only by the admin VS.

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Critical
Mnemonic Code	DB_RESTORE_FAIL
Trap OID	1.3.6.1.4.1.2011.6.10.2.7
MIB	HUAWEI-CONFIG-MAN-MIB
Alarm ID	0x0815200a
Alarm Name	RESTORE_CONFIGURATION_FAIL
Alarm Type	processingErrorAlarm
Raise or Clear	Raise
Match trap	CONFIGURATION_1.3.6.1.4.1.2011.6.10.2.8 hwCfgRestoreSuccess

Parameter	Description
Result	Configuration restoration result.

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.6.10.1.2.8	hwCfgRestoreErrCode	-

Impact on the System

Cause 0: The configuration database file was lost or damaged.
If the configuration database fails to be restored, the configuration information of the existing services will be lost.
Cause 1: The configuration file was lost or damaged.
The configuration database fails to be restored. As a result, the configuration information of the existing services is lost.

Cause 0: The configuration database file was lost or damaged.
1. Run the display configuration recover-result command to check the commands that fail to be restored. Check whether the command format in the configuration file is correct or whether the command is executed in an incorrect view.
- If yes, go to Step 2.
- If the configuration is correct, go to Step 4.
2. Reconfigure the commands that fail to be restored.
- If the alarm persists, go to Step 3.
- If the alarm is cleared, go to Step 4.
3. Collect log and configuration information, and contact technical support personnel.

4. End.
Cause 1: The configuration file was lost or damaged.
Run the display unresumed-configuration active command to check the commands whose configurations fail to be restored.