Physical entity is detected failed.(BaseTrapSeverity=1, BaseTrapProbableCause=68174, BaseTrapEventType=5, EntityPhysicalIndex=4294967295, EntPhysicalContainedIn=4294967295, EntPhysicalName=System, RelativeResource=NA, ReasonDescription=The number of tm resources exceeded 90% of the total tm resources.)
Physical entity is detected failed.
In VS mode, this trap is supported only by the admin VS.
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Alarm |
Trap Severity |
Critical |
Mnemonic Code |
hwEntityCheckFail |
Trap OID |
1.3.6.1.4.1.2011.5.25.129.2.1.15 |
MIB |
HUAWEI-BASE-TRAP-MIB |
Alarm ID |
0x0813005d |
Alarm Name |
hwEntityCheckFail |
Alarm Type |
equipmentAlarm |
Raise or Clear |
Raise |
Match trap |
DEVM_1.3.6.1.4.1.2011.5.25.129.2.1.16 hwEntityCheckResume-68174 |
| Parameter | Description |
|---|---|
BaseTrapSeverity |
indicates the severity level of the trap reported to the NMS. |
BaseTrapProbableCause |
Indicates the possible cause of the trap. |
BaseTrapEventType |
Indicates the trap type. |
EntityPhysicalIndex |
Physical index. The physical index varies with the chassis ID. |
EntPhysicalContainedIn |
Indicates the parent index. |
EntPhysicalName |
Indicates the name of the entity such as a chassis. |
RelativeResource |
Indicates the name of the part related to the trap. |
ReasonDescription |
Indicates the description of the possible cause. |
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.25.129.1.1 |
hwBaseTrapSeverity |
- |
1.3.6.1.4.1.2011.5.25.129.1.2 |
hwBaseTrapProbableCause |
- |
1.3.6.1.4.1.2011.5.25.129.1.3 |
hwBaseTrapEventType |
- |
1.3.6.1.2.1.47.1.1.1.1.4 |
entPhysicalContainedIn |
entPhysicalIndex |
1.3.6.1.2.1.47.1.1.1.1.7 |
entPhysicalName |
entPhysicalIndex |
1.3.6.1.4.1.2011.5.25.129.1.4 |
hwBaseTrapRelativeResource |
- |
1.3.6.1.4.1.2011.5.25.129.1.5 |
hwBaseTrapReasonDescr |
- |
1. Remove unnecessary interface boards or subcards and clear configuration to check whether the fault is rectified.
2. Collect the alarm information, log information, and configuration information, and contact technical support personnel.
3. End.