DEVM_1.3.6.1.4.1.2011.5.25.129.2.2.11 hwVoltFallingAlarm-73216

Trap Buffer Description

SRM_BASE/2/VOLTFALLINGALARM: OID 1.3.6.1.4.1.2011.5.25.129.2.2.11 Voltage exceeded the lower prealarm limit. (EntityPhysicalIndex=[ULONG], EntityPhysicalIndex=[ULONG], BaseThresholdType=3, BaseThresholdEntityPhysicalIndex=[ULONG], BaseTrapSeverity=4, BaseTrapProbableCause=73216, BaseTrapEventType=6, EntPhysicalName=[STRING], BaseThresholdValue=[ULONG], BaseThresholdUnit=5, LowCritical=[ULONG], LowWarning=[ULONG])

The voltage of a physical entity exceeded the lower critical threshold.

In VS mode, this trap is supported only by the admin VS.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Alert
Mnemonic Code	hwVoltFallingAlarm
Trap OID	1.3.6.1.4.1.2011.5.25.129.2.2.11
MIB	HUAWEI-BASE-TRAP-MIB
Alarm ID	0x081300ab
Alarm Name	hwVoltFallingAlarm
Alarm Type	environmentalAlarm
Raise or Clear	Raise
Match trap	DEVM_1.3.6.1.4.1.2011.5.25.129.2.2.12 hwVoltFallingResume-73216

Trap Buffer Parameters

Parameter	Description
BaseTrapSeverity	Indicates the level of trap.
BaseTrapProbableCause	Indicates the possible cause of trap.
BaseTrapEventType	Indicates the type of trap.
EntityPhysicalIndex	Indicates the physical index.
EntPhysicalName	Indicates the textual name of the physical entity.
BaseThresholdValue	Indicates the actual value.
BaseThresholdUnit	Indicates the unit of the value (mV).
BaseThresholdLowCritical	Indicates the upper critical limit.
BaseThresholdLowWarning	Indicates the minor upper limit.

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.129.1.1	hwBaseTrapSeverity	-
1.3.6.1.4.1.2011.5.25.129.1.2	hwBaseTrapProbableCause	-
1.3.6.1.4.1.2011.5.25.129.1.3	hwBaseTrapEventType	-
1.3.6.1.2.1.47.1.1.1.1.7	entPhysicalName	entPhysicalIndex
1.3.6.1.4.1.2011.5.25.129.1.6.1.3	hwBaseThresholdValue	entPhysicalIndex hwBaseThresholdType hwBaseThresholdIndex
1.3.6.1.4.1.2011.5.25.129.1.6.1.4	hwBaseThresholdUnit	entPhysicalIndex hwBaseThresholdType hwBaseThresholdIndex
1.3.6.1.4.1.2011.5.25.129.1.6.1.5	hwBaseThresholdLowCritical	entPhysicalIndex hwBaseThresholdType hwBaseThresholdIndex
1.3.6.1.4.1.2011.5.25.129.1.6.1.6	hwBaseThresholdLowWarning	entPhysicalIndex hwBaseThresholdType hwBaseThresholdIndex

Impact on the System

Temporarily, services will not be interrupted but clearing this trap is urgent.

Possible Causes

Cause 1: The PDF power supply was insufficient.

Cause 2: The power supply module was faulty.

Procedure

1.Run the display voltage slot slot-id command in the user view to view the voltage of each board.

2.Check whether the PDF power supply is sufficient.

If so, go to Step 4.
If not, go to Step 3.

3.Increase the PDF power supply and check whether the trap is cleared.

If so, go to Step 6.
If not, go to step 4.

4. Replace the board and check whether the trap is cleared.

If so, go to Step 6.
If not, go to Step 5.

5. Collect the trap information, log information, and configuration of the router, and contact technical support personnel.

6. End.