DEVM_1.3.6.1.4.1.2011.5.25.157.2.10 hwLosAlarmResume

Trap Buffer Description

Loss of signal alarm resume. (hwPhysicalPortIfIndex=[hwPhysicalPortIfIndex],BoardID=[hwPhysicalPortInSlot],CardID=[hwPhysicalPortInCard],PortID=[hwPhysicalPortInPort],InterfaceName=[hwPhysicalPortName],AlarmName=[hwPhysicalPortAlarmName])

In VS mode, this trap is supported only by the admin VS.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Alert
Mnemonic Code	hwPhysicalPortLosAlarm
Trap OID	1.3.6.1.4.1.2011.5.25.157.2.10
MIB	HUAWEI-PORT-MIB
Alarm ID	0x0813007c
Alarm Name	hwLosAlarm
Alarm Type	communicationsAlarm
Raise or Clear	Clear
Match trap	DEVM_1.3.6.1.4.1.2011.5.25.157.2.9 hwLosAlarm

Trap Buffer Parameters

Parameter	Description
hwPhysicalPortIfIndex	Index of physical port
hwPhysicalPortInSlot	Slot ID
hwPhysicalPortInCard	Card ID
hwPhysicalPortInPort	Port ID
hwPhysicalPortAlarmName	Alarm name
hwPhysicalPortName	Name of physical port

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.6	hwPhysicalPortInSlot	hwPhysicalPortIfIndex
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.7	hwPhysicalPortInCard	hwPhysicalPortIfIndex
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.8	hwPhysicalPortInPort	hwPhysicalPortIfIndex
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.4	hwPhysicalPortName	hwPhysicalPortIfIndex
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.19	hwPhysicalPortAlarmName	hwPhysicalPortIfIndex

Impact on the System

Services are not affected.

Possible Causes

Cause 0: The fault triggering the alarm was rectified.
Cause 1: The fault triggering the alarm was rectified.
Cause 2: The fault triggering the alarm was rectified.
Cause 3: The fault triggering the alarm was rectified.
Cause 4: The fault triggering the alarm was rectified.

Procedure

This trap message is informational only, and no action is required.