DEVM_1.3.6.1.4.1.2011.5.25.157.2.157.1 hwPhysicalPortCrcError

Trap Buffer Description

Crc error alarm.(hwPhysicalPortIfIndex=[hwPhysicalPortIfIndex],hwPhysicalPortName=[hwPhysicalPortName],hwPhysicalPortCrcErrorStatistics=[hwPhysicalPortCrcErrorStatistics],hwPhysicalPortCrcErrorHighThreshold=[hwPhysicalPortCrcErrorHighThreshold],hwPhysicalPortCrcErrorLowThreshold=[hwPhysicalPortCrcErrorLowThreshold],hwPhysicalPortCrcErrorInterval=[hwPhysicalPortCrcErrorInterval])

An alarm is generated when the number of alarms is set higher than the set time.

In VS mode, this trap is supported only by the admin VS.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Critical
Mnemonic Code	hwPhysicalPortCrcError
Trap OID	1.3.6.1.4.1.2011.5.25.157.2.157.1
MIB	HUAWEI-PORT-MIB
Alarm ID	0x08130074
Alarm Name	hwPhysicalPortCrcError
Alarm Type	processingErrorAlarm
Raise or Clear	Raise
Match trap	DEVM_1.3.6.1.4.1.2011.5.25.157.2.157.2 hwPhysicalPortCrcErrorResume

Trap Buffer Parameters

Parameter	Description
hwPhysicalPortIfIndex	Interface index(es) of physical port(s) present on the device.
hwPhysicalPortName	Interface name of physical port(s) present on the device.
hwPhysicalPortCrcErrorStatistics	Crc error statistics value.
hwPhysicalPortCrcErrorHighThreshold	Crc error alarm high threshold.
hwPhysicalPortCrcErrorLowThreshold	Crc error alarm low threshold.
hwPhysicalPortCrcErrorInterval	Crc error alarm interval time(unit is second).

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.1	hwPhysicalPortThrIfIndex	hwPhysicalPortThrIfIndex
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.2	hwPhysicalPortThrName	hwPhysicalPortThrIfIndex
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.3	hwPhysicalPortCrcErrorStatistics	hwPhysicalPortThrIfIndex
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.4	hwPhysicalPortCrcErrorHighThreshold	hwPhysicalPortThrIfIndex
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.5	hwPhysicalPortCrcErrorLowThreshold	hwPhysicalPortThrIfIndex
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.6	hwPhysicalPortCrcErrorInterval	hwPhysicalPortThrIfIndex

Impact on the System

Some of the traffic data on that port is discarded.

Possible Causes

Cause 1: The optical module failed.
Cause 2: The optical fiber failed.

Procedure

1.Replace the optical module and check whether the alarm is cleared.

If so, go to Step 4.
If not, go to Step 2.

2.Replace the fiber, check whether the alarm is cleared.

If so, go to Step 4.
If not, go to Step 3.

3.Collect the alarm information, log information, and configuration information, and then contact technical support personnel.

4.End.